ENG - 9
Questions? Call Toll Free at 1-800-737-2112
Copyright © 2015 MAT Engine Technologies, LLC
Assembly Instructions
B
Assembly
(Continued)
• Save all instructions
If you need assistance or find any parts missing, CALL
TOLL FREE: 1-800-737-2112.
Pin
Depth Regulator Bracket
Depth Regulator Lever
Figure 3
The tiller comes fully assembled except for a few parts.
The following instructions will help you complete the tiller
assembly.
INSTALL THE WHEELS
(See Figure 2)
1. Assure cupped washer is installed onto wheel axle.
2. The tiller wheels are directional. For best performance
install the wheels with the tire thread facing the direction
as shown.
3. Slide the wheel hub onto the wheel axle.
4. Align the wheel hub hole with the hole in the axle and
insert the locking pin.
5. Rotate the locking pin ring to lock the pin in position.
INSTALL THE DEPTH REGULATOR
(See Figure 3)
1. Insert the depth regulator into the bottom of the depth
regulator bracket.
2. Insert the pin thru the bracket and lever.
Wheel lock pin in tiller operating position
(wheel hub and axle holes)
FRONT
Figure 2
