Southland S-RTT-196-E Скачать руководство пользователя страница 7

 

ENG - 7

 

Questions? Call Toll Free at 1-800-737-2112

 

 

Copyright © 2015 MAT Engine Technologies, LLC

Safety Decals

• Save all instructions 

This tiller has been designed and manufactured to provide 

you with the safety and reliability you would expect from an 

industry leader in outdoor power equipment manufacturing. 

Although reading this manual and the safety instructions it 

contains will provide you with the necessary basic knowledge 

to operated this equipment safely and effectively, we have 

placed several safety labels on the tiller to remind you of this 

important information while you are operating the unit. 

These important safety labels are illustrated below, and are 

shown here to help familiarize you with the location and 

content to the safety messages you will see as you perform 

normal tilling operations. Please review these labels now. 

If you have any questions regarding their meaning or how 

to comply with these instructions, reread the complete 

safety instruction text on the preceding pages, or contact 

your local dealer. 

Should any of the safety labels become unreadable because 

of being worn, faded, or otherwise damaged during the use 

of your tiller, please contact your local authorized dealer to 

order replacement labels.

The safety labels are easily applied, and will act as a constant 

visual reminder to you and others who may use the equipment. 

Following the safety instructions is necessary for safe, effective 

operation of your tiller. 

•  Keep away from 

  rotating tines.
•  Contact will result 

  in injury.

• Gasoline is flammable. Allow engine to cool at least 2 minutes    

  before refueling.
• Operation of this equipment may create sparks that can start    

  fires around dry vegetation. A spark arrestor may be required.  

  The operator should contact local fire agencies for laws or  

 

  regulations relating to fire prevention requirements.

Содержание S-RTT-196-E


























Отзывы: