ENG - 10
Questions? Call Toll Free at 1-800-737-2112
Copyright © 2015 MAT Engine Technologies, LLC
Assembly
(Continued)
• Save all instructions
If you need assistance or find any parts missing, CALL
TOLL FREE: 1-800-737-2112.
ATTACH LOWER HANDLE
(See Figure 4)
1. Loosen the lower handle bolts, if required.
2. Align the lower handle holes to the middle height
adjustment holes in the transmission cover and install
the M10 x 25 mm hex head bolts, lock washers, flat
washers and nuts. Tighten all four bolts at this time.
ATTACH UPPER HANDLE
(See Figure 5)
1. Slide the upper handle down over the lower handle and
align the holes.
2. Insert the saddle bolts into the holes as shown and secure
with the handle knobs.
3. Tighten the handle knobs securely.
4. Secure control cables to handle using cable ties.
INSTALL FRONT GUARD
(See Figure 6)
1. Install guard using four M8 x 20 mm hex head bolts, split
washers, flat washers and flange nuts.
Saddle Bolts
Saddle Bolts
Handle Knobs
Handle Knobs
Figure 5
Transmission Cover
Height
Adjustment
Holes
Lower Holes
Figure 4
Figure 6
