The OMD-625 is designed to be mounted on a wall or around a pipe. When installing outdoors in an
extreme environment, consider an enclosure and heater if necessary. Consult the factory for recommen-
dations.
Refer to part 3 operation section of this instruction manual for more information on how to operate the
controls of this oxygen analyzer
Refer to part 4 maintenance section for an overview on how to calibrate the device using a certified span
gas or ambient air.
A precision electrochemical oxygen sensor is included as a separate item and must be installed prior to
instrument use.
CAUTION: Do not open the N2 filled oxygen sensor bag until you have thoroughly read the in
-
struction manual and have made all gas and electrical connections. Please refer to section 2.4
2.2
Mounting The Oxygen Analyzer
Installation
OMD-625 Oxygen Analyzer
Designed, Tested and Assembled in California, USA
4045 E. Guasti Rd. #203 Ontario, CA 91761 USA : 1-949-398-2879 : [email protected] : www.sso2.com
