background image

-56-

For Machines Mfd. Since 10/20

South Bend Tools

Model SB1100 & SB1101

P A R T S

Machine Labels

REF PART #

DESCRIPTION

REF PART #

DESCRIPTION

201

PSB1100201

MACHINE ID LABEL (SB1100)

204

PSB1101204

MODEL NUMBER LABEL (SB1101)

201

PSB1101201

MACHINE ID LABEL (SB1101)

205

PSB1100205

VACUUM PRESSURE GAUGE LABEL

202

PSB1100202

ELECTRICITY LABEL

206

PSB1100206

REMOTE LABEL

203

PSB1100203

DUST COLLECTOR COMBO LABEL

207

PSB1100207

AMPUTATION HAZARD LABEL

204

PSB1100204

MODEL NUMBER LABEL (SB1100)

208

PSB1100208

SOUTH BEND NAMEPLATE 125MM

201

202

202

203

204

205

206

207

208

South Bend

®

INJURY HAZARD

Do not use machine 
if you have not read 
the manual. Visit 
southbendlathe.com 
or call 360-734-1540 
to get a manual.

WARNING!

!

WARNING!

!

!

INJURY/SHOCK 

HAZARD

To avoid shock or 
accidental starting, 
disconnect power 
before adjusting or 
servicing machine. 

WARNING!

!

EYE/LUNG INJURY 

HAZARD

Always wear ANSI- 

approved safety 

glasses and 

respirator when 

using this 

equipment.

Clean filter when 
pressure drops below 
200mmAq (2 kPa) 
and replace after 
150mmAq (1.5 kPa).

WARNING!

!

DO NOT place 
hands near inlet 
during operation!

AMPUTATION

HAZARD

SB1100

Made in Taiwan to South Bend Specifications

WARNING!

!

MODEL SB1100

2 HP SINGLE-STAGE DUST COLLECTOR

MFG Date

Serial No

To reduce the risk of serious injury when using this machine:

 

1.  Read and understand owner’s manual before operating.

  2.  Always wear approved eye protection and respirator while operating machine.
  3.  Only plug power cord into a grounded outlet.
  4.  Only use this machine to collect wood dust/chips—never use to collect glass, metal, 

liquids, asbestos, silica, animal parts, biohazards, burning material/ashes, etc.

  5.  Always disconnect power before servicing or cleaning.
  6.  Do not expose to rain or use in wet areas.
  7.  Keep hands, long hair, and loose clothing away from inlet.
  8.  Never leave machine unattended during operation.
  9.  Do not use if cord, plug, or any other electrical equipment becomes 

damaged—promptly repair!

 10.  Do not use without dust bag, canister, or filters in place.
11.  Do not connect cord to power supply with wet hands.
 12.  Grasp and pull the plug, not the cord, when unplugging.
 13.  Always wear a respirator when emptying bags or canisters.
 14.  Do not modify machine in any way.
 15.  Prevent unauthorized use by children or untrained users; restrict access or disable 

machine when unattended.

Main Motor: 2 HP, 220V, 1-Ph, 60 Hz
Full-Load Current Rating: 9.15A
Airflow Performance: 1103 CFM @ 3.5" SP
Max. Static Pressure: 11.95"
Main Inlet Size: 6"
Adapter Inlet Size: 4"
Max. Collection Capacity: 33-1/2 Gallons 
Cartridge Filter: 19-5/8" x 29"
Filter Rating: 1 Micron 
Replacement Filter: SB1487 
Replacement Bag: T20543
Weight: 157 lbs.

SINCE 

1906

The safety labels provided with your machine are used to make the operator aware of the 

machine hazards and ways to prevent injury. The owner of this machine MUST maintain the 

original location and readability of these safety labels. If any label is removed or becomes 

unreadable, REPLACE that label before using the machine again. Contact South Bend Tools at 

(360) 734-1540 or www.southbendtools.com to order new labels.

Содержание SB1100





























































Отзывы: