South bend SB1100, Руководство пользователя

Страница: 23 / 60

South Bend Tools
For Machines Mfd. Since 10/20 Model SB1100 & SB1101
-21-
P R E P A R A T I O N
Figure 28. Filter brush motor cord routed into switch
box.
27. Pull motor cord from filter brush motor
through strain relief at top of switch box (see
Figure 28).
Motor
Cord
Strain
Relief
28. SB1101 Only: Repeat Step 26 with second
filter brush motor cord.
30. Tighten strain relief (see Figure 28) to
secure motor cords in position.
31. Attach swtich box cover to switch box with
(2) Phillips head screws loosened in Step 7.
29.
Connect terminal ends of motor cord(s) to
right terminals of timer inside switch box
(see Figures 29 and 30).
Note: Timer module may be pulled off
terminal block if it is in the way during
connection of motor cords.
Figure 29. SB1100 filter brush motor connection.
AMY-2 5A 250VAC
0
1
2
3
AMY
24
0 VA
C
A
N
LY
Ground
2
2
1
1 1
Timer
Motor Cord
Connect
Note: For full wiring diagrams, refer to SB1100
Wiring Diagram on Page 45 and SB1101 Wiring
Diagram on Page 48.
Figure 30. SB1101 filter brush motor connection.
AMY-2 5A 250VAC
0
1
2
3
AMY
24
0 VA
C
A
N
LY
Ground
2
2
1
1 1
Timer
Motor Cords
Connect
32. Attach
1
⁄
2
" hose to pressure gauge and port
under impeller intake with and (2)
3
⁄
4
" hose
clamps (see Figure 31).
33. Attach inlet adapter to impeller intake, then
secure inlet adapter with (1) 10-24 x
3
⁄
8
"
flange screw (see Figure 31).
Figure 31. Inlet adapter secured to impeller housing.
Pressure
Gauge
Hose
Connection