South Bend Tools SB1122 Скачать руководство пользователя страница 85

Страница: 85 / 88

South Bend Tools

For Machines Mfd. Since 10/21

Model SB1122

-83-

P A R T S

Machine Labels (Front)

REF PART #

DESCRIPTION

REF PART #

DESCRIPTION

601 PSB1122601 MACHINE ID LABEL

606 PSB1122606 MODEL NUMBER LABEL

602 PSB1122602 COMBO WARNING LABEL

607 PSB1122607 KEEP PANEL CLOSED LABEL

603 PSB1122603 CONTROL PANEL LABEL

608 PSB1122608 TOUCH-UP PAINT, SB DARK BLUE

604 PSB1122604 FLUID CAPACITY LABEL

609 PSB1122609 TOUCH-UP PAINT, SB LIGHT BLUE

605 PSB1122605 SOUTH BEND NAMEPLATE 152MM

610

PSB1122610 CUTTING HAZARD LABEL

SB1122

INJURY HAZARD

Do not use machine
if you have not read
the manual. Visit
southbendtools.com
or call 360-734-1540
to get a manual.

WARNING!

EYE/LUNG INJURY

HAZARD

Always wear ANSI-

approved safety

glasses and

respirator when

using this

equipment.

WARNING!

INJURY/SHOCK

HAZARD

To avoid shock or
accidental starting,
disconnect power
before adjusting or
servicing machine.

Always wear safety
glasses and
respirator when
using this equipment.

WARNING!

CUTTING HAZARD

Always keep hands
and body away from
blade when machine
is running.

Made in Taiwan to South Bend Specifications

WARNING!

Main Motor: 1-1/2 HP, 220V, 1-Ph, 60 Hz
Hydraulic Motor: 1/2 HP, 220V, 1-Ph, 60 Hz
Coolant Motor: 1/8 HP, 220V, 1-Ph, 60 Hz
Full-Load Current Rating: 7.7A
Blade Speeds: 85–265 FPM
Blade Length: 108-1/4"
Max. Round @ 90º: 10"
Max. Rectangle @ 90º: 9"H x 12"W
Max. Round @ 45º: 7-7/8"
Max. Rectangle @ 45º: 7"H x 7"W
Vise Jaw Depth: 12-5/8"
Vise Jaw Height: 5-1/2"
Angle Cuts: Left 45°, Right 60°
Weight: 860 lbs.

MODEL SB1122

9" X 12" 1½ HP

METAL-CUTTING BANDSAW

SINCE

1906

To reduce risk of serious injury when using this machine:

  1. Read and understand owner’s manual before operating.
  2. Never touch moving blade—keep hands out of blade path.
  3. Always wear approved eye protection and respirator.
  4. Only plug power cord into a grounded outlet.
  5. Ensure machine is correctly set up before starting.
  6. Only remove jammed cutoff pieces when blade is stopped.
  7. Disconnect power before changing blades, making adjustments, or servicing.
  8. Maintain proper adjustment of blade tension, tracking, and guides.
  9. Always ensure workpiece is securely clamped in vise while cutting.
10. Only run saw with wheel covers closed and guards in place.
11. DO NOT wear loose clothing, gloves, jewelry, or other articles that can get entangled.
    Tie back long hair and roll up sleeves.
12. DO NOT expose to rain or use in wet locations.
13. DO NOT operate under influence of drugs or alcohol.
14. Prevent unauthorized use by children or untrained users; restrict access or disable
    machine when unattended.

Serial No

MFG Date

3.9 gal.

Coolant Tank

Component

Type

Specific to Operation
and Material

Capacity

Fluid Capacity

SINCE

1906

Hydraulic Tank 7.9 qt.

ISO 46 Hydraulic Oil
or SAE Equivalent

WARNING!

INJURY HAZARD

Keep panel closed

while machine is

operating.

Disconnect power

before opening

panel.

601

602

603

604

605

606

607

608

609

610

SINCE

1906

SB1122 Machine Labels A

(07.21.21)

• 1:1 Scale (unless otherwise noted)
• Labels must be made of
chemical-resistant material

FOR SOUTH BEND MACHINES ONLY!

DO NOT REPRODUCE OR CHANGE THIS ARTWORK WITHOUT

WRITTEN APPROVAL! South Bend will not accept labels changed without approval.

If artwork changes are

required, contact us immediately at [email protected].

***

SB1122

COLOR CODES

SOUTH BEND LOGO RED

PANTONE 180 C or RAL 2002

PANTONE 151 C or RAL 2003

WARNING

CAUTION

PANTONE 109 C

DANGER

PANTONE 485 C or RAL 3001

SOUTH BEND YELLOW

PANTONE 122 C or RAL 1032

MODEL NUMBER

PANTONE COOL GRAY 1C

Made in Taiwan to South Bend Specifications

WARNING!

MODEL SB1122

9" X 12" 1½ HP

METAL-CUTTING BANDSAW

SINCE

1906

To reduce risk of serious injury when using this machine:

Serial No

MFG Date

INJURY HAZARD

Do not use machine
if you have not read
the manual. Visit
southbendtools.com
or call 360-734-1540
to get a manual.

WARNING!

EYE/LUNG INJURY

HAZARD

Always wear ANSI-

approved safety

glasses and

respirator when

using this

equipment.

WARNING!

INJURY/SHOCK

HAZARD

To avoid shock or
accidental starting,
disconnect power
before adjusting or
servicing machine.

INJURY HAZARD

Keep door closed
while machine is
operating. Disconnect
power before
opening door.

WARNING!

Always wear safety
glasses and
respirator when
using this equipment.

WARNING!

CUTTING HAZARD

Always keep hands
and body away from
blade when machine
is running.

WARNING!

POISON/

BIOHAZARD

Refer to the cutting
fluid manufacturer’s
Material Safety Data
Sheets (MSDS) for
safety information.

3.9 gal.

Coolant Tank

Component

Type

Specific to Operation
and Material

Capacity

Fluid Capacity

SINCE

1906

Hydraulic Tank 2 gal.

ISO 46 Hydraulic Oil
or SAE Equivalent

IMPORTANT: Labels marked with *** must have individual
letters/numbers. Do not print with a clear background.

WARNING!

INJURY HAZARD

Keep panel closed

while machine is

operating.

Disconnect power

before opening

panel.

Содержание SB1122

























































































Результаты поиска

Содержание SB1122

Отзывы:

Похожие инструкции для SB1122

Бренды по названию

Популярные бренды

South Bend Tools SB1122, Руководство пользователя

Результаты поиска

Содержание SB1122

Отзывы:

Похожие инструкции для SB1122

Бренды по названию

Популярные бренды