South Bend Tools Oil Country Series, Руководство пользователя

Страница: 6 / 68

South Bend Tools South Bend Tools
-4-
For Machines Mfd. Since 7/19 Model SB1065F–SB1071F
I N T R O D U C T I O N
Description of Controls
& Components
Headstock
A. Spindle Speed Range Hub:
Selects one of
four spindle speed ranges.
B. Headstock Feed Direction Lever: Controls
direction of leadscrew and feed rod rotation.
C. Headstock Range Lever:
Shifts headstock
into low range, neutral, or high range.
D. Lettered Gearbox Levers: Sets leadscrew and
feed rod cutting pitch in relation to spindle
rotation for threading and feed operations.
E. Feed Mode Lever: Switches gear range in
gearbox between (MP/DP) and (IN/MM)
threading or feeding options.
F. Gearbox Speed Dial: Controls leadscrew and
feed rod speed for the cutting pitch selected
by the lettered gearbox levers.
Figure 2. Headstock controls. Figure 2. Headstock controls.
A A
B B
C C
D D
E E
F F
Refer to Figures 1–11 and the following
descriptions to become familiar with the features
and basic controls of this lathe. This knowledge
will be necessary to properly set up the lathe for
the test run and spindle break-in.
Master Power Switch
The rotary switch shown in Figure 1 toggles
incoming power ON and OFF to lathe controls.
It also prevents the electrical cabinet door from
being opened when the switch is ON.
To reduce the risk of
serious injury when using
this machine, read and
understand this entire
manual before beginning any
lathe operations.
Figure 1. Location of master power switch. Figure 1. Location of master power switch.
Master Power Master Power
Switch Switch
Turning the master power switch to OFF is not
a safe alternative to completely disconnecting
the machine from power when wiring,
servicing, or making repairs.