South Bend Tools Oil Country Series, Руководство пользователя

Страница: 49 / 68

South Bend Tools South Bend Tools
For Machines Mfd. Since 7/19 Model SB1065F–SB1071F
-47-
M A I N T E N A N C E
Tailstock Gearbox
The tailstock on this lathe requires its gearbox is
cleaned and lubricated at least once a year.
Note
: The two brass plugs at the top of the
tailstock (see Figure 71) do not cover fill ports.
These knurled plugs only serve as dust covers for
threaded lifting-eye locations.
Figure 71. Tailstock lifting-eye fastening locations. Figure 71. Tailstock lifting-eye fastening locations.
Lifting Eye Lifting Eye
Locations Locations
Frequency ................ Annually or When Changing
Grease Type ............................................... NLGI#2
Small Stiff Brush for Grease ................................1
Hex Wrench 3mm .................................................1
Mineral Spirits ...................................... As Needed
Rags ....................................................... As Needed
To lubricate gearbox:
1. Remove four cap screws and gearbox access
cover.
2. Clean gears and teeth (see Figure 72) using
mineral spirits, brush, and rags.
3. Wipe sides of gears with a light coat of
grease to prevent surface rust.
4.
Apply a generous coat of grease to gear teeth
and rotate controls to distribute grease.
5. Re-install access cover.
Figure 72. Tailstock two-speed gearbox. Figure 72. Tailstock two-speed gearbox.