SousVideTools IVIDE THERMAL CIRCULATOR HOME 2.0, Руководство пользователя

Страница: 10 / 147

10
• Place the SousVideTools® iVide Thermal Circulator Home 2.0 in a heat resistant container that is
sufficiently deep to hold the device using the clamp.
• Fill the container with water level between the MIN and MAX markings on the heating element housing.
Note: Placing vacuum bag with food will increase the water level. Check the water level afterwards to
ensure that it does not beyond MAX marking.
• Connect the power cable to the power supply. Press the Start/Stop button.
A: VIA THE CONTROL PANEL
1.
Use the Temp/Time button to select Temperature and then set the desired value with the + and - buttons.
2.
Use the Temp/Time button to select the required time, again using the + and - buttons.
3. When you select the temperature and time of cooking, press the Start/Stop button to start the appliance.
After reaching the required temperature, light will turn from red to green. Place the bag in water.
CAUTION! The water will be hot.
4.
After reaching the set cooking time, remove the bag from the hot water using kitchen tongs. The machine
will beep once the cooking has finished.
Note: If there is no operation, the machine will emit a continuous beep after 20 seconds, while the water
temperature will remain at the preset temperature.
5. Finish the cooking process by searing the meat in a pan to obtain the taste of fried meat and crunchy crust.
Add a little butter and briefly sear the cooked meat on both sides.
6. After the cooking process is finished, disconnect the device from the power supply and leave it to cool down
before cleaning. To avoid any risk of burns, leave the water to cool before pouring it from the container.
B: BY USING THE IVIDE APP (REPLACES STEPS 1 & 2)
Connect the device (if this is the first time you perform this operation, please refer to the information above).
Select the recipe or use the calculator and then follow the directions on the display. The application will
automatically select the correct temperature and time of cooking. Select ‘Start cooking’. The SousVideTools®
iVide Thermal Circulator Home 2.0 will start heating water to the set temperature. For safety reasons do not
place bags with food in water before reaching the set temperature.
COMPATIBILITY DISCLAIMER
Wireless performance is dependent on your device’s WI-FI wireless technology, please refer to your device’s
manufacturer. SousVideTools.com will not be liable for any lost of data or leakage resulting from the use of
these devices.
O P E R AT I O N
EN // USER GUIDE