7. Maintenance
7.1. Replacement fuse
To replace the fuse, use only the fuse type specified in the
equipment.
Fuse specifications:
Fuse Schurter, model SPT 5 x 20 (Time-lag) 8 A / 250 V.
High breaking capacity.
1. Disconnect the equipment from the mains, unplugging the power cord.
2. With a screwdriver, remove the fuse holder cover, lightly pressing the
lid and turning ¼ counter clockwise.
3. Remove the blown fuse and insert a new fuse in the fuse holder
cover.
4. Place the cover in the compartment and with the screwdriver turn ¼
clockwise or until the fuse holder cover properly fits the fuse
compartment.
7.2. Cleaning
Cleaning of this instrument should be carried out using a soft cleaning
liquid, after verifying that it doesn’t affect the plastic parts used in the case
and in the Control Panel of this equipment.
To avoid electrical shock, make sure that the equipment is
completely dry before Power it On.
19
