manualshive.com logo in svg

Source fire Sourcefire 3D System, Руководство по установке

Поделиться
Скачать
Source fire Sourcefire 3D System Скачать руководство пользователя страница 2

Terms of Use Applicable to the User Documentation

The legal notices, disclaimers, terms of use, and other information contained herein (the "terms") apply only to 

the information discussed in this documentation (the "Documentation") and your use of it. These terms do not 

apply to or govern the use of websites controlled by Sourcefire, Inc. or its subsidiaries (collectively, "Sourcefire") 

or any Sourcefire-provided products. Sourcefire products are available for purchase and subject to a separate 

license agreement and/or terms of use containing very different terms and conditions.

Terms of Use and Copyright and Trademark Notices

The copyright in the Documentation is owned by Sourcefire and is protected by copyright and other intellectual 

property laws of the United States and other countries. You may use, print out, save on a retrieval system, and 

otherwise copy and distribute the Documentation solely for non-commercial use, provided that you (i) do not 

modify the Documentation in any way and (ii) always include Sourcefire's copyright, trademark, and other 

proprietary notices, as well as a link to, or print out of, the full contents of this page and its terms. 
No part of the Documentation may be used in a compilation or otherwise incorporated into another work or with 

or into any other documentation or user manuals, or be used to create derivative works, without the express 

prior written permission of Sourcefire. Sourcefire reserves the right to change the terms at any time, and your 

continued use of the Documentation shall be deemed an acceptance of those terms.
Sourcefire, the Sourcefire logo, Snort, the Snort and Pig logo, Immunet, ClamAV and certain other trademarks 

and logos are trademarks or registered trademarks of Sourcefire, Inc. in the United States and other countries. 

Other company, product and service names may be trademarks or service marks of others.
© 2004 - 2013 Sourcefire, Inc. All rights reserved.

Disclaimers

THE DOCUMENTATION AND ANY INFORMATION AVAILABLE FROM IT MAY INCLUDE INACCURACIES OR 

TYPOGRAPHICAL ERRORS. SOURCEFIRE MAY CHANGE THE DOCUMENTATION FROM TIME TO TIME. 

SOURCEFIRE MAKES NO REPRESENTATIONS OR WARRANTIES ABOUT THE ACCURACY OR SUITABILITY OF 

ANY SOURCEFIRE-CONTROLLED WEBSITE, THE DOCUMENTATION AND/OR ANY PRODUCT INFORMATION. 

SOURCEFIRE-CONTROLLED WEBSITES, THE DOCUMENTATION AND ALL PRODUCT INFORMATION ARE 

PROVIDED "AS IS" AND SOURCEFIRE DISCLAIMS ANY AND ALL EXPRESS AND IMPLIED WARRANTIES, 

INCLUDING BUT NOT LIMITED TO WARRANTIES OF TITLE AND THE IMPLIED WARRANTIES OF 

MERCHANTABILITY AND/OR FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL SOURCEFIRE BE 

LIABLE TO YOU FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, PUNITIVE, OR 

CONSEQUENTIAL DAMAGES (INCLUDING BUT NOT LIMITED TO PROCUREMENT OF SUBSTITUTE GOODS OR 

SERVICES, LOSS OF DATA, LOSS OF PROFITS, AND/OR BUSINESS INTERRUPTIONS), ARISING OUT OF OR IN 

ANY WAY RELATED TO SOURCEFIRE-CONTROLLED WEBSITES OR THE DOCUMENTATION, NO MATTER HOW 

CAUSED AND/OR WHETHER BASED ON CONTRACT, STRICT LIABILITY, NEGLIGENCE OR OTHER TORTUOUS 

ACTIVITY, OR ANY OTHER THEORY OF LIABILITY, EVEN IF SOURCEFIRE IS ADVISED OF THE POSSIBILITY OF 

SUCH DAMAGES. BECAUSE SOME STATES/JURISDICTIONS DO NOT ALLOW THE EXCLUSION OR LIMITATION 

OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES, THE ABOVE LIMITATIONS MAY NOT APPLY TO 

YOU.
The Documentation may contain "links" to websites that are not created by, or under the control of Sourcefire. 

Sourcefire provides such links solely for your convenience, and assumes no responsibility for the availability or 

content of such other sites.
2013-Oct-18 16:20

Содержание Sourcefire 3D System

























































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды