SA262
Ventris Dual Reverb Owner’s Manual
7
Connections
Input Side Connections
Input 1
I
NPUT
1 is the primary input for guitar, bass, or other instruments. It can also accept line-level inputs
and will work in your amp’s effect loop. Connect it to your
instrument or other audio source using a
mono (TS) 1/4”
cable. Details about the allowed signal levels are available in the
Specifications
section.
Input 2
I
NPUT
2 is the secondary audio input for stereo sources, external effects loop input, or as the data
connection to your mobile device when using the Neuro App.
•
Input 2 as an Audio Input
:
The tip contact on I
NPUT
2 acts as a secondary input for guitar, bass, or
other instruments. Connect your instrument (or the previous effect in the signal chain) using a
mono (TS) ¼” cable. The Ventris
will automatically configure itself for stereo audio input. Other
routing options are available using the Neuro App. For more information about stereo routing,
refer to the
Stereo Operation
section.
•
Input 2 as an External Loop Return
:
If the Ventris routing mode includes an external loop,
O
UTPUT
2 is the loop send and I
NPUT
2 is the loop return. Connect I
NPUT
2 to the output of the
external e
ffects loop using a mono (TS) ¼”
cable.
•
Input 2 as a Neuro App Data Input
:
The ring contact on I
NPUT
2 acts as a data connection for the
Neuro Mobile
App. The Neuro App sends data to the pedal using your mobile device’s
headphone jack. Connect it to your mobile device using the included ster
eo (TRS) 1/8” to 1/4”