SA262
Ventris Dual Reverb Owner’s Manual
6
cause the reverb to circulate indefinitely.
PRE-DELAY:
Adjusts the amount of time between the dry signal and the beginning of the reverb. Turn
the PRE-DELAY knob clockwise to create echo reflections similar to slapback or delay effects.
MIX:
Controls the relative level between the dry input signal and the wet. When set at 3 o'clock, the
wet and dry signals will be at equal volume. Fully counter-clockwise is 100% dry, and fully clockwise is
100% wet.
TREBLE:
Controls the cut-off point of a low pass filter on the wet signal. Turn the knob clockwise for
brighter reverb trails and counter-clockwise for darker trails.
CONTROL 1 & CONTROL 2:
The functions of these knobs vary depending on the selected reverb
engine. Check the
Reverb Engines
section of this manual for the parameter descriptions of each
CONTROL knob’s function.
ENGINE SELECTOR KNOB:
Selects between the 12 main effect engines. To access the additional
reverb engines, use the Neuro Mobile App or Desktop Editor.
ON/OFF FOOTSWITCH:
Engages or bypasses the reverb effect. The corresponding O
N
/O
FF
LED will be
lit when the reverb effect is engaged. In addition (while the pedal is engaged), pressing and holding
the ON/OFF Footswitch scrolls to the next Preset.
OPTION FOOTSWITCH (FOOTSWITCH #2):
This dual action footswitch comes preloaded with two
independent control functions that vary depending on the selected engine. The footswitch responds
to two actions: quickly tapping, or press & hold. Each of the two actions prompts a different function.
See the
Reverb Engines
section for descriptions of each default control function. Option Footswitch
commands include tap tempo for the Pre-Delay or modulation, Hold, Build, A/B reverb toggling, and
more. It is also possible to program alternative control options with the Neuro App or Desktop Editor.
A/B REVERB SELECTOR TOGGLE SWITCH:
Selects between reverbs A, B, or A+B. Save two
independent reverb effects (one for each processor) in each of the Ventris’s
128 presets and use the
A/B Toggle Switch to select which is active. Selecting A + B will engage both reverbs simultaneously.
Note: the initial engagement position of this switch can be saved as part of a preset. Go to the
Editing
and Saving Dual Engine Presets
section for complete instructions on dual reverb presets.
PRESET SELECT/SAVE BUTTON:
Scrolls through the four user presets (or eight in Preset Extension
Mode) saved in the Ventris. To save a preset into the currently selected spot, press and hold this
button.
AUTOMATIC STEREO DETECTION:
The Ventris monitors its Input and Output connections and
configures itself to the appropriate stereo routing mode. It is also possible to override this and
choose a custom routing mode using the Neuro Editors.