soundsation Scenemaker 1216, Руководство пользователя

Страница: 13 / 48

all channels (A) or Pan & Tilt only (P).
5. Press
BLACKOUT
and
TAP SYNC/DISPLAY
to save settings. All LEDS will blink
to confirm setting.
6. OPERATION
6.1. MANUAL MODE
Manual mode allows direct control of all scanners. You are able to move them and
change attributes by using the channel faders.
1. Press the
AUTO/DEL
button repeatedly until the
MANUAL
LED is lit.
2. Select a
SCANNER
button.
3. Move faders to change fixture attributes.
4.
PAGE SELECT A/B
button: Use to switch between fader control of (
A
: Ch1~8),
(
B
: Ch 9~16).
5.
TAP SYNC/DISPLAY
button: Press to toggle the output indicator on LED dis-
play between DMX values (0-255) or percentage (0-100).
NOTES: All changes made while in Manual Mode are temporary and will not
be recorded.
6.2. REVIEW SCENE OR CHASE
This instruction assumes that you have already recorded scenes and chases on the con-
troller. Otherwise, please skip this section and go to programming.
SCENE Review
1. In manual mode, select one of the 23 banks by pressing the
BANK UP/DOWN
buttons.
2. Select a
SCENE
button (
1
to
8
) to review.
3. Move the faders to change fixture attributes.
CHASE Review
1. In manual mode, press any one of the 6
CHASE
buttons.
2. Press
TAP SYNC/DISPLAY
button to view step number on display.
3. Press
BANK UP/DOWN
buttons to review all scenes in the chase.
13
ENGLISH
SCENEMAKER 1216 User manual