18
ENGLISH
POCKETLIVE U16 User manual
capsule.
52. INPUT SOCKET:
Connect the mini-jack connector of the headset into this socket.
53. POWER INDICATOR:
This LED lights up briefly when you turn on the pocket transmitter. Under normal oper-
ating conditions, this LED does not light. It flashes when batteries charge level is low
and they must be replaced.
54. POWER SWITCH:
It switches on and off the pocket transmitter.
55. VOLUME:
It adjusts the sound source input level of the signal and allows you to adapt the gain of
the transmitter to any type of audio source.
56. ANTENNA:
It allows the transmission of the radio signal. Be careful to not bend or break this termi-
nal.
57. ACT WINDOW:
To properly operate this wireless microphone, it’s crucial to set the same working
frequency between transmitter and receiver. This sensor enables to acquire the used
frequency information directly from the transmitter. Refer to the section below for more
details.
58. BATTERY SLOT:
Batteries are housed inside the transmitter. Use 2x 1.5V AA-Type batteries paying
attention to their polarity.
59. BATTERY COVER:
For battery replacement follow the instructions below:
f
Apply a slight pressure at the top of the two sides of this door and open the slot.
f
Insert or replace the batteries in the compartment, observing the +/- polarity marked
on the bottom.
f
Close the cover so as to avoid the leakage of the batteries.
