16
ENGLISH
POCKETLIVE U16 User manual
then choose one of the 16 frequencies available through the following procedure:
f
Press button (25) to turn on the receiver when the amplifier is operating.
f
Hold for a few seconds the SET key (40). CH icon on the display will blink for about
nine seconds.
f
Press UP button (39) to switch to the next channel or DOWN (41) to switch to the
previous one.
f
Press SET button (40) to confirm your choice. For a few seconds the “H” icon at the
bottom right of the display flashes, indicating that the system is being set.
f
When the “H” icon stops flashing (about 8 seconds), the system is searching for the
transmitter. During this research, the “M” icon on the bottom left will blink.
f
When the transmitter is “hooked”, that is set to the same frequency of the receiver,
the “M” icon stops blinking.
8.2. POCKETLIVE U16HBT HANDHELD TRANSMITTER
45
46
47
48
50
49
45. GRILL:
It protects the microphone capsule. Do not remove this cap to prevent damage to
internal components.
46. ON/OFF SWITCH:
It has 2 positions: when it’s all down, the transmitter is off; when it’s all up, the transmit-
ter is working and the audio is active.
NOTE: Normally, professional wireless microphones have a stand-by inter-
mediate position, which enables the operation of the transmitter without
audio. This avoids interference due to the absence of the transmitter signal.
In the case of POCKETLIVE U16, it is not necessary because the system is
equipped with digital tracking circuit that inhibits the audio in the absence
of the radio signal.
