1.800.338.7337 / www.soundoffsignal.com
2
ENFSLXSS 11.14
FLASH PATTERNS
PATTERN #
SINGLE
COLOR
DUAL COLOR
TRI-COLOR
1
QUINT
2
WARP
3
INTER-CYCLE
4
DOUBLE
5
QUAD
6
POWER PULSE
7
ROAD RUNNER
8
Q-SWITCH
9
STEADY-BURN / ROADRUNNER
(SEQUENCE TYPE 1: STEADY BURN, SEQUENCE
TYPE 2: ROADRUNNER)
10
STEADY-BURN DRIVER TITLE 13 QUAD
(SEQUENCE TYPE 1: STEADY BURN, SEQUENCE
TYPE 2: TITLE 13 QUAD)
11
QUAD 2
12
DOUBLE 2
13
RANDOM 1
14
RANDOM 2
OVER-VOLTAGE PROTECTION
When an over-voltage condition is detected, the module will flash an over-voltage warning pattern of 50mS ON/950mS OFF to alert of the over-voltage condition and protect the electronics from damage due to heat/voltage.
THERMAL COMPENSATION PROTECTION
The LED module is designed to provide maximum power output while providing protection to the electronic components by reducing the output power at extreme temperatures.
SYNC 2
Syncronizing the flashing of multiple light modules is accomplished by connecting the Green and/or Blue wires of different light modules together. Up to 24 light modules can be connected for syncronized flashing. All light module flash patterns
must be set to the same flash pattern # to ensure proper operation. Refer to the Sequence Type section (in Set-Up Table) to setup light modules to flash in alternate or simultaneous flash pattern. NOTE: Will NOT work with non-Sync 2 prod-
ucts such as Ghost, LED3, and Single Color Intersector.
