SCD2120
/ English Instruction Manual
2
HEADPHONE
1. Insert the headphone cable (requires 3.5mm stereo plug, not supplied) into the headphone
jack on the unit.
2. Tune the desired volume level on the main unit.
RADIO
1. Set the
FUNCTION
switch to FM position.
2. Rotate the TUNING control to tune to your desired radio station.
3. Adjust the sound level by rotating the VOLUME control.
4. To turn off the radio, set the FUNCTION switch to OFF position.
For best reception, fully extend the FM Antenna to receive FM stations.
CD MODE
1. Set the FUNCTION switch to the CD position.
2. Insert the CD disc in the CD compartment and close the CD door, the unit will start reading
the disc, the LED display will show the total number of tracks of the entire disc after reading.
3. To start playing the CD, press the button and display LED indicator light on.
4. To pause CD playback, press the button again and display LED indicator is blinking.
5. Adjust the VOLUME Control to the desired volume level.
6. To stop playing the CD, press the
STOP
button.
Skip Mode
1. During play or pause mode, press the button to go to the next track.
2. During play or pause mode, press the button to go back to the beginning of the track.
3. During play mode, press the button twice will go back to the previous track.
Programming the CD Player
The programming of the CD player should be done during STOP mode.
2. Press the
PROG
button, the LED display will show ‘ 01 ‘ and flash continuously.
3. Press the or buttons to select the desired track.
4. Press the
PROG
button again to store this track in memory, the LED will show ‘ 02 ‘ and
flash continuously.
5. Repeat steps from 2 to 3 to store more tracks in memory. You can store up to 20 tracks in
the memory.
6. Press the button to play the disc in the programmed order.
7. To stop playing, press the
STOP
button.
8. To cancel the programming list, press the
STOP
button and open the CD door or set the
FUNCTION
switch to OFF position.
