NR961
/ English Instruction Manual
5
FM
Press the “
FUNCTION
” button repeatedly, or “
MODE
” button on the remote control, to select the
FM mode.
AUTOMATIC STATION SEARCH
1.
Rotate the “
TUNE/SKIP/SELECT/SNOOZE
” knob clockwise and press the
“
SCAN/PLAY/PAUSE
” button. You can also use the “
PAIR/SCAN
” button and then the
“
SKIP FORWARD
” button on the remote control. The radio begins to search forward and
will automatically stop when a station is found.
2.
Rotate the “
TUNE/SKIP/SELECT/SNOOZE
” knob counter-clockwise and press the
“
SCAN/PLAY/PAUSE
” knob. The radio begins to search backward and will automatically
stop when a station is found.
MANUAL STATION SEARCH
Rotate the “
TUNE/SKIP/SELECT/SNOOZE
” knob, or press “
SKIP BACK
” or “
SKIP
FORWARD
” until the desired radio station is found.
Note:
In order to get a better reception, please adjust the antenna position. Under the
“Audio setting mode”, choose the mono mode, the FM reception effect will be better.
STORE RADIO STATIONS
To store radio stations is the same as in DAB mode.
RECALL STORED RADIO STATIONS
To recall radio stations is the same as in DAB mode.
FM DISPLAY INFORMATION
Press the “
MENU/INFO
” button repeatedly to cycle through the information modes. The
information is displayed on the lower segment of the display.
ANNOUNCEMENT
Announcement allows your unit to interrupt your radio playback, change the station if there is an
traffic or emergency announcement broadcasted from another station.
To activate announcement function:
1.
Press and hold the “
MENU/INFO
” button and rotate the “
TUNE/SKIP/SELECT/SNOOZE
”
knob to select “System”, press the “
TUNE/SKIP/SELECT/SNOOZE
” knob to confirm.
2.
Rotate the “
TUNE/SKIP/SELECT/SNOOZE
” knob to select “Announcement” and confirm with
“
TUNE/SKIP/SELECT/SNOOZE
“
3.
Now choose between “On” and “Off”, confirm your selection with
“
TUNE/SKIP/SELECT/SNOOZE
”
AUDIO SETTING (Stereo allowed/ Forced mono)
1. Press and hold the
“
MENU/INFO
” button to enter into the menu. Rotate the
“
TUNE/SKIP/SELECT/SNOOZE
” to select “Audio Setting” and press the
“
TUNE/SKIP/SELECT/SNOOZE
” knob to confirm.
2. Rotate the
“
TUNE/SKIP/SELECT/SNOOZE
” knob to select the desired audio setting
“Stereo allowed” or “Forced mono”. Press the “
TUNE/SKIP/SELECT/SNOOZE
” knob to
confirm.
