NR961
/ English Instruction Manual
4
STORE RADIO STATIONS
In either DAB or FM, you can store up to 20 of your favorite stations to the memory. This will
enable you to access your favorite stations quickly and easily.
1.
To store a station select the desired station with the “
TUNE/SKIP/SELECT/SNOOZE
” knob
and press the “
TUNE/SKIP/SELECT/SNOOZE
” knob to confirm. Press the “
PRESET/P-
MODE
” button.
2. Now the display will show the Preset stations from 1-20
“<1: (Empty) >”.
3.
Choose the desired Preset Station number by using the “
TUNE/SKIP/SELECT/SNOOZE
“
knob. Press and hold the ”
TUNE/SKIP/SELECT/SNOOZE
”
to store the station as a preset.
Display shows: “Preset (x) Stored”
Note:
If
there is a station that already stored, it will show the stored “Station name/
frequency and P#” you can overwrite the stored station the same as an empty preset station
number.
4. Repeat step 1 to 3 to store further stations.
RECALL STORED RADIO STATIONS
1. To recall a stored station, press the
“
PRESET/P-MODE
” button. Choose with the
“
TUNE/SKIP/SELECT/SNOOZE
” knob the desired station and press the
“
TUNE/SKIP/SELECT/SNOOZE
” knob to confirm.
2. If you choose a preset station number that has not been allocated a station,
”Preset Empty”
will be displayed.
DAB DISPLAY INFORMATION
Press the
“
MENU/INFO
” button repeatedly to cycle through the information modes. The
information is displayed on the lower segment of the display.
DRC (Dynamic range compression)
This function reduces the difference between the loudest and quietest audio being broadcast.
Effectively, this makes quiet sounds comparatively louder, and loud sounds comparatively
quieter.
Note:
DRC only works if it is enabled by the broadcaster for a specific station.
1. Press and hold the
“
MENU/INFO
” button and rotate the “
TUNE/SKIP/SELECT/SNOOZE
”
knob to select
“System”, press the “
TUNE/SKIP/SELECT/SNOOZE
” knob to confirm.
2. Rotate the
“
TUNE/SKIP/SELECT/SNOOZE
” knob to select “DRC” and confirm with
“
TUNE/SKIP/SELECT/SNOOZE
“
3.
Now choose between “Off/Low/High” and confirm with “
TUNE/SKIP/SELECT/SNOOZE
”
PRUNE INVALID
You may remove all unavailable stations from the list.
1. Press and hold
the “
MENU/INFO
” button and rotate the “
TUNE/SKIP/SELECT/SNOOZE
”
knob to select “System”, press the “
TUNE/SKIP/SELECT/SNOOZE
” knob to confirm.
2.
Rotate the “
TUNE/SKIP/SELECT/SNOOZE
” knob to select “Prune” and confirm with
“
TUNE/SKIP/SELECT/SNOOZE
“
3. Now
choose between “No” and “Yes”, confirm your selection with
“
TUNE/SKIP/SELECT/SNOOZE
”.
