General operation
1. To turn on the unit, press
STANDBY/
ON
Button
. The ON/OFF indicator will appear on the display.
2. Slide the FUNCTION selector to select CD, AM, FM or LINE IN.
3. Adjust the sound with the VOLUME control.
4. To turn off the set, press
STANDBY/ON Button
again. The ON indicator will disappear from the
display.
Connect the AC power cord to a wall outlet.
1. 12:00 will be shown on the display and begin to flash.
2.
During STANDY MODE,
Press
button to set the hour and then press
button to set the minute.
3. Press the CLOCK ADJ./PROGRAM button to confirm the time, the digits will stop
flashing.
4. Press and hold the CLOCK ADJ./PROGRAM button to switch between 12H and 24H.
5. During
STANDBY
mode, press the CLOCK ADJ./PROGRAM button and repeat steps 2 to 4
to change the time as well.
Note: The clock does not keep time during a power failure.
1. Slide the FUNCTION selector to AM or FM position.
2. Press the
STANDBY/
ON button, the ON indicator will light up.
3. Tune into a station using the TUNING control. The Dial Scale
window can
show the current
frequency.
FM: Extend the FM aerial wire to improve FM reception.
AM: Turn the unit for better AM reception.
1. Open the CD door.
2. Place a disc in the centre with the label side facing up and close the CD door.
3. Press the
STANDBY
/O
N
button to ON status, the ON indicator will light up.
4. Slide the FUNCTON selector to CD position, the display will show flashing “ Cd ”
before the reading process is completed.
SETTING THE CLOCK/TIME
LISTEN TO THE RADIO
CD PLAYING
GB-
5
