1. Connect your USB device into the USB
port
. The USB indicator will be shown on
the display.
2. Press the
STANDBY/
ON button to ON status, the ON indicator will light up.
3. Slide the FUNCTON selector to CD position.
4. Press and hold
to enter into USB mode. The display will show flashing “ USb ”
before the reading process is completed.
Note: The basic operation of USB mode is the same with CD operation, please refer
to the previous instruction.
This unit is compatible with most of the USB devices available in the market.
We can not guarantee 100% workable with all USB devices and it is not an
indication of malfunction of the unit.
You can listen to the sound from external audio sources through this unit.
1. Slide the FUNCTION selector to LINE IN position.
2. Connect the external audio source through 3.5mm cable to the LINE IN jack, located
at the rear of unit.
3. Set the external audio player to play.
Note: connection cable is not included
The radio, buzzer or CD automatically sounds at the designated time every day. You
can set in total two wake times (ALARM 1, ALARM 2) into this unit.
Note: please do under
STANDBY
mode, while the ON indicator is off. )
1. Press the ALARM 1 or ALARM 2 button, the digits will flash.
2. Press the
and
buttons to set the desired wake up time.
3. Press the ALARM 1 or ALARM 2 button to confirm after setting. The ALARM 1 or
ALARM 2 active indicator will light up on the display.
4. Slide the FUNCTION selector to LINE IN
/BUZZER
position for BUZZER wake up. For
CD/AM/FM wake up, slide the FUNCTION selector to CD, AM or FM position and
adjust the desired volume.
5. To cancel the ALARM 1 wake up, press the ALARM 1 button once, the active
indicator will off (The cancellation of ALARM 2 is the same).
TO SET THE ALARM TO WAKE TO BUZZER/CD/RADIO
LINE-IN FUNCTION
USB FUNCTION
GB-
7
