IR4400 / English Instruction Manual
4
GETTING STARTED / SET UP
Mains operation
: Connect the unit to a suitable power source using the power supply
provided. After showing a starting screen, it will enter the last used
listening mode. When the unit is started for the first time, the setup wizard
will be launched automatically.
Battery operation:
Open the battery compartment door. Install 6 x1.5V LR20 / AM-1/D size
batteries (not included) into the compartment. Please follow the correct
polarities as indicated. The batteries are automatically disconnected while
using the power supply
CAUTION:
• Remove batteries if they are flat or not being used for a long period of time.
• Batteries contain chemical substances, so they should be disposed of properly.
GET THE NETWORK ENVIRONMENT READY
Make sure you have setup the wireless network and you have the WEP, WPA or WPA2 security
password to activate the connection.
You may also use the WPS (WiFi Protected Setup) function for easy pairing between the
network device and IR4400. Check if the light indicators on the network device are in
appropriate status.
MAIN MENU
Under the main menu, you can select the following modes:
Internet Radio, Media player, DAB, FM, Bluetooth, AUX-In, Sleep and
Alarm.
SYSTEM SETTINGS
At the first time operation, system asks if you want to start the
Setup Wizard. The Setup wizard guides you through the basic setup
parameters for time/Date and Network connection. To change any
settings later all setting functions are accessible from the Settings Menu.
