IR4400 / English Instruction Manual
6
For the wireless connection, you will be asked for input the
encryption in the next step. To enter the network’s key, use
the Tuning / Select / Snooze knob to move the cursor through
the characters and select
“OK” to confirm. As each character
is selected, the key is built up near the top of the display.
There are three options accessible by tuning the navigate
reel back before the first characters
– Backspace, OK and
Cancel.
WPS encrypted network
WPS encrypted networks are identified by
WPS
at the start of the network name
when the
IR4400 searches the available AP. Use one of the following methods of connection:
There is the shortcut WPS key on the unit.
Push button
IR4400 prompts you to press the connect button on the
router. It then scans for a ready Push Button Connect
network and connects.
Pin
IR4400 generates an 8-digit code number which you enter
into the wireless router, access point, or an external registrar.
Skip WPS
Enter key as for a standard encrypted network.
For more information on setting up a WPS encrypted network, see your WPS router’s
instructions.
Completion
IR4400 attempts to connect to the selected network.
It will show connected if the setup is successful. If
connecting fails,
IR4400 returns to a previous screen to try again.
Press SELECT to quit the setup wizard.
