Setting up for the First Time Use
For the first time setup, there is a need to setup the calendar and clock time.
1
When the unit is plugged in AC power first time, it enters system setup mode.
2
The “YEAR” will blink on the display.
3
Press the <</>> buttons to set the current YEAR.
4
Press
SNOOZE/DIMMER
button to confirm the setting.
5
Repeat 3 and 4 above to adjust MONTH, DATE, HOUR, MINUTE and AM/PM.
6
Press the
12/24
button at the back to select 12/24 hour display format.
Notes:
If you want to change the date and the clock, simply press and hold the
SET
button at the back for 3 seconds, then operate according to step 2 ~6 for
setting.
After the unit is out of power completely (no AC plugged and backup battery has
been drained), once the power is resumed, the unit will be reset to default
settings as the first time usage and the “year digit” will keep blinking to alert you
to set the date and the clock time again.
Setting the Daylight Saving Time (DST)
1
When daylight saving time begins, slide the DST switch to “1” position, it will add
one hour to the display time.
2
When daylight saving time ends, slide the DST switch to “0” position, the
displaytime will fall back one hour.
Using and Setting the Alarm
1. Press and hold the
ALARM SET
button and then press
HOUR/MIN
buttons to set the desired alarm time.
2. Slide the
ALARM
switch to
ON
position to complete the alarm setting
and turn the alarm on.
3. If you want to turn the alarm off, simply slide the
ALARM
switch to
OFF
position.
4. You can simply press the
ALARM SET
button to display the alarm
time you have set.
Using Snooze and Shutting off the Alarm
1. If you prefer to get some more sleep after the alarm goes off, simply
press
SNOOZE
/
DIMMER
button while the alarm is sounding. The
alarm sound will stop and the icon
z
will display on the screen. The
alarm will sound again after 10 minutes. (The snooze function will
repeat for 12 times.)
2. If you want to shut the alarm off completely, simply slide the
ALARM
switch to
OFF
position to turn off the alarm.
Note
:
Remember to slide the
ALARM
switch to
ON
position for the
next day to wake you up.
Displaying the Date
Short press either
HOUR
or
MIN
button to show you today’s date.
Setting Screen Brightness
Press
SNOOZE/DIMMER
button repeatedly to change the screen brightness.
Charging your Mobile Devices
USB Charging
You can charge most phones as well as other USB chargeable devices directly
from Charge Rise. Simply connect your device to either USB ports in the front
of Charge Rise to begin charging.
The 1.0A port is for regular charging (phone).
The 2.1A port is for fast charging or charging bigger device (tablet).
Wireless Charging Pad
The wireless charging pad is 180° rotatable to fit your nightstand
or desktop setting. You can simply lock the charging pad in three
positions (front, left or right).
The charging pad provides up to 10W maximum power. Not all
phones are capable of fast wireless charging with full 10W of
power.
Note
:
Place the unit on a flat surface for the stability of your mobile
device during wireless charging.
Battery Replacement
T
here is a backup battery for keeping the clock time and the
date. When the level of backup battery is low, the low battery
indicator will appear on the display. It is the time to
replace the battery.
To replace the battery, unscrew the cover, then remove the
battery door. After replacing the battery, put back the battery
door and the screw.
Restoring to Default Setting
Press and hold
SNOOZE/DIMMER
button and the
ALARM SET
button simultaneously for 5~6 seconds to reset the user setting
including ALARM TIME and DIMMER BRIGHTNESS to default
setting. Release both buttons when you see the “cLr ” message.
ALARM
SET
SNOOZE/DIMMER
Wireless Charging
CAUTION
BEFORE
putting your mobile phone onto the wireless charging pad for
charging,
REMOVE YOUR CARDS
including any magnetic stripe or RFID cards
(such as credit cards, transportation cards or key cards, etc.) placed/
inserted
AT THE BACK
of your phone or your phone protective case.
REMOVE METAL / MAGNETIC OBJECTS
on the top of the wireless
charging pad (such as coins, keys or paper clips, etc.). No foreign object
should be placed between the phone and the charging pad during
charging.
REMOVE YOUR PHONE PROTECTIVE CASE
if it consists of any metal
or magnetic part.
1. Place your phone(with built-in Qi charging function) on the wireless
charging pad. For the best result, please remove the phone protective case
before charging.
2. You may need to adjust or align your phone position on the charging pad
until the charging indicator is ON.
HOUR
ALARM
SET
MIN
SNOOZE/DIMMER
ON
OFF
Quick Start Guide
Charge Rise
Quick Start Guide
Charge Rise
Quick Start Guide
Charge Rise
SNOOZE/DIMMER
Wireless Charging Pad
Charging Indicator
1.0A
FAST CHARGE
2.1A
Status
ON
when charging
OFF
when the mobile device is removed from the charging pad
when not charging properly due to a general error
(
Please remove your phone or any foreign metal object on
the charging pad if any
)
Indicator
Blinking
Display the
current date
