R e t u R n t o ta b l e o f C o n t e n t s
S o u n d E a r ® 3 – m a n u a l
60
FActOry SEttinGS
rESEt tHE dEvicE tO FActOry SEttinGS
if you want to reset your device to factory settings, you can do so by connecting the device to your computer
via USB cable and clicking the button ‘Factory Settings’ in the menu.
PLEASE nOtE!
this will remove all your previous settings and data from the device and re-install the original
settings.
soundear®3 factory settings
light settings
Green:
30 dB - 120 dB
yellow:
75 dB -120 dB
red:
80 dB -120 dB
All measurements are shown as dB (A) Slow.
night settings
yellow:
60 dB -120 dB
red:
60 dB -120 dB
night settings are not part of the standard settings. to activate, please check the ”night Settings” box.
advanced settings
Output 1:
dB(A) Slow
Output 2:
dB (c) Fast
Output type: 0-10 v
Min. output: 30 dB
Max. output: 120 dB
MAintEnAncE
to ensure correct and precise performance of SoundEar®3, repairs and service should be carried out by a trained
technician.
After any repairs or service, a functionality check must be performed before using SoundEar®3 again.
disinfeCtion / Cleaning
SoundEar®3 partly consists of materials that do not tolerate certain substances used in surface disinfectants.
disinfection by wiping
• First, remove dirt and grime from the surface using a damp, disposable cloth.
• then disinfect the surface with alcohol wipes, followed by dry cloth.
