27
S o u n d E a r ® 3 – m a n u a l
R e t u R n t o ta b l e o f C o n t e n t s
dEFinE SEttinGS
EXPOrt LiGHt SEttinGS tO dEvicE viA USB
if your unit is already installed, you have the option to change and transfer your light settings and
the settings for the mini display manually to your device by exporting your settings to a usB stick.
1. Go to ‘define settings’ and go through the tabs ‘noise
levels’ and ‘display’ to create your settings
without
clicking “Configure”.
2. return to the tab ‘Export settings to USB’ and click on
‘Export setup to USB’. Make sure you have a formatted
USB stick connected to your Pc.
3. insert the USB stick in the SoundEar®3. your new light
settings are now being transferred to from the USB
stick to your device.
nOtE!
Alarm settings and wireless settings can only be
transferred to your device when directly connected to your
Pc via a USB cable.
