background image

4

For your own safety and to avoid invalidation of the

warranty please read this section carefully.

SAFETY SYMBOL GUIDE

For your own safety and to avoid invalidation of the warranty all text marked with these symbols
should be read carefully.

WARNINGS

The lightning flash with arrowhead symbol, is

The lightning flash with arrowhead symbol, is

The lightning flash with arrowhead symbol, is

The lightning flash with arrowhead symbol, is

The lightning flash with arrowhead symbol, is

intended to alert the user to the presence of

intended to alert the user to the presence of

intended to alert the user to the presence of

intended to alert the user to the presence of

intended to alert the user to the presence of
un-insulated “dangerous voltage” within the

un-insulated “dangerous voltage” within the

un-insulated “dangerous voltage” within the

un-insulated “dangerous voltage” within the

un-insulated “dangerous voltage” within the

product’s enclosure that may be of sufficient

product’s enclosure that may be of sufficient

product’s enclosure that may be of sufficient

product’s enclosure that may be of sufficient

product’s enclosure that may be of sufficient

magnitude to constitute a risk of electric shock

magnitude to constitute a risk of electric shock

magnitude to constitute a risk of electric shock

magnitude to constitute a risk of electric shock

magnitude to constitute a risk of electric shock

to persons.

to persons.

to persons.

to persons.

to persons.

CAUTIONS

The exclamation point within an equilateral

The exclamation point within an equilateral

The exclamation point within an equilateral

The exclamation point within an equilateral

The exclamation point within an equilateral

triangle is intended to alert the user to the

triangle is intended to alert the user to the

triangle is intended to alert the user to the

triangle is intended to alert the user to the

triangle is intended to alert the user to the

presence of important operating and

presence of important operating and

presence of important operating and

presence of important operating and

presence of important operating and

maintenance (servicing) instructions in the

maintenance (servicing) instructions in the

maintenance (servicing) instructions in the

maintenance (servicing) instructions in the

maintenance (servicing) instructions in the

literature accompanying the appliance.

literature accompanying the appliance.

literature accompanying the appliance.

literature accompanying the appliance.

literature accompanying the appliance.

NOTES

Contain important information and useful tips

Contain important information and useful tips

Contain important information and useful tips

Contain important information and useful tips

Contain important information and useful tips

on the operation of your equipment.

on the operation of your equipment.

on the operation of your equipment.

on the operation of your equipment.

on the operation of your equipment.

HEADPHONES SAFETY WARNING

Contain important information and useful tips

Contain important information and useful tips

Contain important information and useful tips

Contain important information and useful tips

Contain important information and useful tips

on headphone outputs and monitoring levels.

on headphone outputs and monitoring levels.

on headphone outputs and monitoring levels.

on headphone outputs and monitoring levels.

on headphone outputs and monitoring levels.

Recommended Headphone Impedance >= 200 Ohms.

Recommended Headphone Impedance >= 200 Ohms.

Recommended Headphone Impedance >= 200 Ohms.

Recommended Headphone Impedance >= 200 Ohms.

Recommended Headphone Impedance >= 200 Ohms.

Содержание UREI 1620LE

































Отзывы: