Soundcast VG10, Руководство пользователя

Страница: 6 / 61

6
rent volume level will be displayed with blue LED’s on
the volume bar graph.
➤ Mobile devices that support the AVRCP protocol
can adjust the volume from the mobile devices
volume slider control.
Fuel Gauge:
Press the Power button for (1) second and beep is
heard to display the current battery level bar graph us-
ing a combination of RED=Low, YELLOW=OK, GREEN=-
Full LEDs. The bar graph will move counter-clockwise
as the battery discharges.
➤
The fuel-gauge and amber low battery LED
indicators will NOT be accurate until at least two full
charging/discharging cycles have been completed.
Keyboard Lock
The VG10 has two different keypad lockout mecha-
nisms to prevent un-intended or accidental operation.
Both are disabled by default. When enabled, all keypad
functions except for power on/off will be ignored.
Blue LEDs
illuminate in
clockwise direction
to indicate
volume level.
Volume Level Indication
Battery Status Indication
Volume
up
button
Orange
Power
LED
Volume
down
button
Red
(Low
Battery)
Yellow
(Ok
Battery)
Green
(Charged
Battery)
Child Lock:
To Enable or Disable, press and hold the mute button
for (5) seconds and release. The top most BLUE LED
will flash indicating the keypad is locked and child lock
is active. Power cycling the unit will disable the keypad
child lock.
Keypad Lock Indicator:
Flashing Blue:
Child Lock Active
Flashing Green:
Auto Lock Active
Slide finger from power
button to
any
function
button, and release.
Mute
button
Temporary Unlock
Swipe Action
Auto Lock:
To Enable or Disable Auto-Lock, press and hold the
mute button for (10) seconds and release. The
volume bar graph will blink twice when enabled and
once when disabled. When enabled, the keypad will
“Auto-Lock” after (3) minutes of no keypad interaction.
The top GREEN LED will blink indicating the keypad is
locked The Auto-Lock will remain enabled or disabled
when power cycling the unit.
Temporarily unlock the keypad for use while Auto-Lock
is activeby conducting an “Unlock Swipe”. This can be
done by sliding your finger quickly between the power
button and any other function button, being sure to
release your finger while it is still over the “other func-
tion” button. The volume bar graph will blink indicating
that the keypad is unlocked. Keypad will auto-lock again
after (3) minutes of no interaction.
Auto Shutdown
– VG10 will automatically power down
after 15 minutes of no audio to preserve battery.