www.soundskulptor.com
Document revision 2.3 – Last modification : 27/05/21
MP573 Assembly guide – Main PCB, A side
30. Input transformer front PCB
Use the input transformer front PCB, the one with the pin holes and numbers.
Two units of this PCB are available. Only one will be used.
Insert the 90°, 13 pins headers, long tails first, into the holes, from the top
side, marked SOUNDSKULPTOR.
Use the supplied jumpers to hold the connector in position while you solder one
pin. Remove the jumpers and solder the other pins. Cut the straight pins sharp.
Warning
: the pin headers must sit perfectly perpendicular to the PCB surface for a good matching with
the main PCB.
Copyright ©2015 SoundSkulptor
