background image

29

SPL electronics GmbH (hereafter called SPL) products are warranted only in the

country where purchased, through the authorized SPL distributor in that country,

against defects in material or workmanship. The specific period of this limited

warranty shall be that which is described to the original retail purchaser by the

authorized SPL dealer or distributor at the time of purchase.

SPL does not, however, warrant its products against any and all defects:

1) arising out of materials or workmanship not provided or furnished by SPL, or

2) resulting from abnormal use of the product or use in violation of instructions, or

3) in products repaired or serviced by other than authorized SPL repair facilities, or

4) in products with removed or defaced serial numbers, or 5) in components or

parts or products expressly warranted by another manufacturer. 

SPL agrees, through the applicable authorized distributor, to repair or replace

defects covered by this limited warranty with parts or products of original or

improved design, at its option in each respect, if the defective product is shipped

prior to the end of the warranty period to the designated authorized SPL warranty

repair facility in the country where purchased, or to the SPL factory in Germany, in

the original packaging or a replacement supplied by SPL, with all transportation

costs and full insurance paid each way by the purchaser or owner.

All remedies and the measure of damages are limited to the above services. It is

possible that economic loss or injury to person or property may result from the

failure of the product; however, even if SPL has been advised of this possibility,

this limited warranty does not cover any such consequential or incidental

damages. Some states or countries do not allow the limitations or exclusion of

incidental or consequential damages, so the above limitation may not apply to

you.

Any and all warranties, express or implied, arising by law, course of dealing,

course of performance, usage of trade, or otherwise, including but not limited to

implied warranties of merchantability and fitness for particular, are limited to a

period of 1 (one) year from either the date of manufacture. Some states or coun-

tries do not allow limitations on how long an implied warranty lasts, so the above

limitations may not apply to you.

This limited warranty gives you specific legal rights, and you may also have

other rights which vary from state to state, country to country. 

SPL electronics GmbH

41372 Niederkrüchten, Germany

Warranty

Содержание EQ MAGIX































Отзывы: