Sound Devices Scorpio Скачать руководство пользователя страница 74

Страница: 74 / 84

Scorpio

User Guide

POWER

External: 10-18 V input on locking TA4 connector, pin-4 = (+), pin-1 =

(-),

Dual rear-mount Sony-style L-mount batteries with chargers

Current Draw, at 12V no battery charging:

All mic preamps off: 950 mA

All mic preamps on: 1.26 A

All mic preamps on, 192 kHz sample rate, recording to internal SSD

and 2 SD Cards: 1.42 A

All mic preamps on, 192 kHz sample rate, recording to internal SSD

and 2 SD Cards, Dante enabled: 1.67 A

Intelligent power-down of unused mic preamps and other internal

circuits

Smart Battery telemetry supported via DC Input

ENVIRONMENTAL

Operating: -20° C to 60° C, 0 to 90% relative humidity (non-condens-

ing)

Storage: -40° C to 85° C

DIMENSIONS (H X W X D)

5.1 cm x 32 cm x 20.5 cm

2.0 in. x 12.6 in. x 8.1 in

WEIGHT

5.8 lbs (unpackaged, without batteries)

2.63 kg (unpackaged, without batteries)

RECORDING

Internal 256 GB SSD, two removable SD Cards

10% over-provisioned for optimum performance

Selectable bit depth 16 or 24-bit

Simultaneous recording to internal SSD and the two SD cards

exFAT formatting

36 tracks (32 ISO channels, 4 buses)

Broadcast WAV monophonic and polyphonic file format

64-bit WAV (RF64) monophonic and polyphonic; support for files > 4

AAC 2 track at 48 kHz, selectable bit rate 32, 64, 128, 192, 256 kbps

AUTOMATIC MIXING

Dugan Automixer up to 16-channels on Left and Right Mix bus

MixAssist up to 16-channels on Left and Right bus

NOISE SUPPRESSION

Via optional paid Sound Devices NoiseAssist or CEDAR sdnx Plugins

Two, four, or eight instances of Noise Suppression can run on any

combination of isolated channels (excluding 17-32 on Scorpio), or

buses.

Attenuation range: 0-20 dB

NoiseAssist operates with sampling rates of 44.1 kHz to 48.048 kHz.

CEDAR sdnx operates with sampling rates of 44.1 kHz to 96 kHz.

NoiseAssist audio path latency: 0.77 ms @ 48kHz

CEDAR sdnx audio path latency: 0.27 ms @ 48kHz, 0.14ms @ 96kHz

USB

USB-C (USB 3.1 type 1) for file transfer of internal SSD, both SD Cards

USB-C 2-in/2 out audio streaming

USB-A host for keyboard, external controller, external USB hubs

supported for connecting multiple devices

TIMECODE AND SYNC

Modes Supported: Off, Rec Run, Free Run, 24h Run, External,

including External Auto-Record and Continuous modes.

Frame Rates: 23.98*, 24, 25, 29.97 DF, 29.97 ND, 30 DF, 30 ND

Sample/Timecode Accuracy: 0.1 ppm (0.25 frames per 24 hours)

Timecode Input: 20k ohm impedance, 0.3 V - 3.0 V p-p (–17 dBu - +3

dBu)

Timecode Output: 75 ohm impedance, 5 V p-p (+7 dBu)

Word Clock Input: 10k/75 ohm selectable impedance, 1-5 V p-p input

sensitivity

Word Clock Output: 75 ohm impedance, 5 V p-p output, at SR

REMOTE CONTROL

Sound Devices CL-16 Linear Fader Controller

Sound Devices CL-12 Linear Fader Controller

USB MIDI MCU Control - supported 3rd party fader controllers

SD-Remote Android Tablet app via USB or Bluetooth LE

SD-Remote Android Phone app via Bluetooth LE

SD-Remote iPad and iPhone app via Bluetooth LE

USB Keyboard

External Timecode Record Trigger

FILE DELIVERY TO CLOUD

Compatible with Frame.io Camera to Cloud

Compatible with Viviana Cloud

LCD

320x240, transflective, excellent sunlight visibility

Larger touchscreen display available via SD-Remote app

Содержание Scorpio





















































































Результаты поиска

Содержание Scorpio

Отзывы:

Sound Devices Scorpio, Руководство пользователя, Страница: 74 / 84

Результаты поиска

Содержание Scorpio

Отзывы: