Sound Devices Scorpio Скачать руководство пользователя страница 23

Страница: 23 / 84

Scorpio

User Guide

5. HP PRESETS

Selects the list of headphone presets available and allows for editing

and creation.

Function Description

Name

Displays virtual keyboard and allows for naming of the

headphone preset.

Edit

Allows selection of routed sources to both HP Left and HP

Right. Select HP LEFT or RIGHT and then select desired

source.

i. ISO- Any source selected will be routed to the selected

HP output. Green = Pre-fade, orange = Post-fade. [1-16]

ii. Bus- [L,R, 1-8]

iii. Com- [Rtn]

iv. Return- [A1, A2, B1, B2]

Mono

Selects monophonic monitoring of selected HP-L/HP-R

sources.

Selects monophonic monitoring of selected HP-L/HP-R

sources.

Unlist

De-selects a preset in the list preventing it from being

listed in the HP Preset menu (press HP knob on Home

Screen).

List

Selects a preset in the list allowing it to be listed in the HP

Preset menu (press HP knob on Home Screen).

Fav

Selects a favorite preset. The name turns green when

selected. The “Fav” switch recalls this HP preset when in

the Home Screen.

Limiters

CHANNEL LIMITERS QUICK SETUP

Selects the channel limiters

on/off status globally. [All On*, All Off]

BUS LIMITERS QUICK SETUP

Selects the bus limiters on/off

status globally. [All On*, All Off]

CHANNEL THRESHOLD

Selects the threshold at which the channel

limiters activate. -6 dBFS* [-2 to -12 dBFS]

CHANNEL RATIO

Selects the ratio of the limiter. [Inf:1, 10:1, 12:1,

14:1, 16:1, 18:1, 20:1*]

CHANNEL KNEE

Selects the channel limiter Knee. [Hard, Soft]

CHANNEL ATTACK

Selects the channel limiter attack time [1*-200

ms]

CHANNEL RELEASE TIME

Selects the release time of the limiters

in 10 ms increments. 100 ms* [50-1000 ms]

BUS THRESHOLD

Selects the threshold at which the bus limiters

activate. -3 dBFS* [-2 to -12 dBFS]

CHANNEL THRESHOLD

Selects the threshold at which the channel

limiters activate. -6 dBFS* [-2 to -12 dBFS]

BUS RATIO

Selects the ratio of the limiter. [Inf:1, 10:1, 12:1, 14:1,

16:1, 18:1, 20:1*]

BUS KNEE

Selects the bus limiter Knee. [Hard, Soft]

BUS ATTACK

Selects the bus limiter attack

BUS RELEASE TIME

Selects the release time of the limiters in 10

ms increments. 100 ms* [50-1000 ms]

BUS THRESHOLD

Selects the threshold at which the bus limiters

activate. -3 dBFS* [-2 to -12 dBFS]

Содержание Scorpio





















































































Результаты поиска

Содержание Scorpio

Отзывы:

Sound Devices Scorpio, Руководство пользователя, Страница: 23 / 84

Результаты поиска

Содержание Scorpio

Отзывы: