Sound Devices Kashmir MIXPRE-3 II страница 81 Скачать руководство пользователя

Страница: 81 / 84

Software License & FCC Compliance Statement

End-user license agreement for Sound Devices 6-Series Software / Embedded Firmware

Important Read carefully:

This Sound Devices, LLC end-user license agreement (“EULA”) is a legal agreement between you (either an

individual or a single entity) and Sound Devices, LLC for the Sound Devices, LLC software product identified

above, which includes computer software, embedded firmware, and may include associated media, printed

materials, and “online” or electronic documentation (“SOFTWARE PRODUCT”). By using, installing, or copy

ing the SOFTWARE PRODUCT, you agree to be bound by the terms of this EULA. If you do not agree to the

terms of this EULA, do not use or install the SOFTWARE PRODUCT.

Software Product License

The SOFTWARE PRODUCT is protected by copyright laws and international copyright treaties, as well as

other intellectual property laws and treaties. The SOFTWARE PRODUCT is licensed, not sold.

Grant of license. This EULA grants you the following limited, non-exclusive rights: In consideration of

payment of the licensee fee, Sound Devices, LLC, as licensor, grants to you, the licensee, a non-exclusive

right to use this copy of a Sound Devices, LLC software program (hereinafter the “SOFTWARE”) on a single

product and/or computer. All rights not expressly granted to licensee are reserved to Sound Devices, LLC.

Software ownership. As the licensee, you own the hardware on which the SOFTWARE is recorded or fixed.

Sound Devices, LLC shall retain full and complete title to the SOFTWARE and all subsequent copies of the

SOFTWARE, regardless of the media or form on or in which the original copies may exist. The license is not

a sale of the original SOFTWARE.

All rights, title, and copyrights in and to the SOFTWARE PRODUCT (including, but not limited to, any im

ages, photographs, animations, video, audio, music, text, and “applets” incorporated into the SOFTWARE

PRODUCT) and any copies of the SOFTWARE PRODUCT are owned by Sound Devices, LLC or its suppliers.

The SOFTWARE PRODUCT is protected by copyright laws and international treaty provisions. Therefore, you

must treat the SOFTWARE PRODUCT like any other copyrighted material, except that you may make copies

as only provided below. You may not copy the printed materials accompanying the SOFTWARE PRODUCT.

Restrictions on use. Licensee may not distribute copies of the SOFTWARE or accompanying materials to

others. Licensee may not modify, adapt, translate, reverse engineer, decompile, disassemble, or create de

rivative works based on the SOFTWARE or its accompanying printed or written materials.

Transfer restrictions. Licensee shall not assign, rent, lease, sell, sublicense, or otherwise transfer the SOFT

WARE to another party without prior written consent of Sound Devices, LLC. Any party authorized by Sound

Devices, LLC to receive the SOFTWARE must agree to be bound by the terms and conditions of this agree

ment.

Termination

Without prejudice to any other rights, Sound Devices, LLC may terminate this EULA if you fail to comply

with the terms and conditions of this EULA. In such event, you must destroy all copies of the SOFTWARE

PRODUCT and all of its component parts.

Limited Warranty

No warranties. Sound Devices, LLC expressly disclaims any warranty for the SOFTWARE PRODUCT. The

SOFTWARE PRODUCT and any related documentation is provided “as is” without warranty or condition of

any kind, either express or implied, including, without limitation, the implied warranties and conditions of

merchantability, fitness for a particular purpose, or non-infringement. The entire risk arising out of use or

performance of the SOFTWARE PRODUCT remains with you.

No liability for damages. In no event shall Sound Devices, LLC or its suppliers be liable for any damages

whatsoever (including, without limitation, damages for loss of business profits, business interruption, loss

of business information, or any other pecuniary loss) arising out of the use of or inability to use this Sound

DRAFT

Not For Publication

Содержание Kashmir MIXPRE-3 II





















































































Результаты поиска

Содержание Kashmir MIXPRE-3 II

Отзывы:

Похожие инструкции для Kashmir MIXPRE-3 II

Бренды по названию

Популярные бренды

Sound Devices Kashmir MIXPRE-3 II, Руководство пользователя

Результаты поиска

Содержание Kashmir MIXPRE-3 II

Отзывы:

Похожие инструкции для Kashmir MIXPRE-3 II

Бренды по названию

Популярные бренды