Panel Views
Top Panel
1 & 10: Antenna Connector A & B
SMA connectors, connects to included 1/4-wave whip antenna
.
2 & 9: Channel 1 & 2 Power LED
●
Illuminates blue when the channel’s receiver circuitry is powered and operational.
●
Blue LED flashes when the paired transmitter’s battery is critically low or depleted.
3 & 8: Channel 1 & 2 Green/Red RF Status LEDs
●
Indicates signal strength of received RF
●
Channel’s green LED illuminates solid green with good RF reception. It starts to flicker green as the received RF signal
quality deteriorates.
●
Channel’s red LED illuminates solid red when the receiver channel loses lock to the transmitter signal due to weak signal
or transmitter being turned off.
●
Channel’s green and red LEDs are off at the fringe of reception.
●
Solid green LED and flashing red LED on both channels 1 & 2 when RF signal is approaching overload on either channel.
●
Channel’s red LED flashes when RF overload is occurring.
4: Left Button
Moves the menu selection to the left, or decrements values
.
5: Center Button
Enters the menu selection. Also used to select options in the menu.
6: Right Button
Moves the menu selection to the right, or increments values.
7: Display
The screen can be set to turn off after a period of inactivity from the Selection menu (
Main
>Settings>Display>Screensaver
).
A20-RX
User Guide
5
Содержание A20-RX
Страница 1: ...A20 RX Two Channel True Diversity Receiver with SpectraBand Technology User Guide v6 00 ...
Страница 33: ...24 no connection 25 Ground Ground connection A20 RX User Guide 33 ...
Страница 36: ...using USB C power needs to be applied to the TA 4 or Hirose A20 RX User Guide 36 ...
Страница 42: ...A20 RX User Guide 42 ...