![Soul P910B Скачать руководство пользователя страница 17](http://html1.mh-extra.com/html/soul/p910b/p910b_operating-manual_1333060017.webp)
Using the Tools Menus of the PIAB
Using the Tools Menus of your PIAB
Your PIAB includes a tools menu that gives you access to the Lights, Volume settings, Software Updates and EQ settings.
From these sub menus you will be able to set the light ambience of the PIAB as well as select a pre-set volume level that
your PIAB will always start at. In addition we will do periodic software updates to help improve the user experience of the
PIAB. These updates can be found on our website (www.soulelectronics.com)or through our customer service department
(1-800-566-7685). Updating the software is a simple process and only takes a few minutes. Finally we all know that music
sounds better if you can control the frequency output through an equalizer. We have created 12 pre-set EQ curves cover-
ing everything from Hip Hop to Country music and everything in between. The EQ curves will definitely enhance your
listening experience. Below are the instructions to access all of the features mentioned above.
Volume Tool Menu
In order to prevent damage to your equipment or your hearing we have preset the start up volume level of the PIAB. This
will prevent any sudden high output level that could cause damage or injury.
You do have the option to change the pre-set volume level on your PIAB. From the start-up menu select the
Tools
button
(Figure 35). From the Tool menu select the
Volume
button (Figure 36) this will give you access to the Volume Preset Menu
(Figure 37). From this menu you can set the preset volume level
Up
or
Down
until you find the desired setting. Once you
have selected the volume level press the
Set
button (Figure 37) to save the desired setting. From that point on every time
you turn the PIAB on it will start at the volume level you have preset.
You may also change the volume level at any time from the volume
Up
and
Down
buttons located on the upper left hand
corner of the PIAB. The PIAB can be placed in Mute mode by pressing the
Power
button once and releasing. You will see an
image of a speaker with an X across it on the LCD display (Figure 38). To unmute press the
Power
button again.
Start-Up Menu
Tool Menu
Figure 35
Figure 36
Volume Preset Menu
Start-Up Menu
Figure 37
Figure 38
Note: On page 4 of this manual you will find information and a chart to help you understand the effects of loud noises on
your hearing.
16.