12.
Using the Source Menus of the PIAB
(Figure 10B). From there you can change the Audio Mode to play just the left channel or the right channel and you can
change back to Stereo as well. Once you have selected the channel you want to play the display will say Stereo, Left or
Right in the center of the display. This feature is beneficial when you have more than one PIAB and you want to set them
close to each other but also want to hear a true channel separation during playback.
FM Source
From the start up menu you can select the
FM
shortcut button (Figure 11) once selected the display will change to the FM
menu (Figure 12) where you can choose between the FM tuning menu and the Presets menu.
Start-Up Menu
FM Menu
Figure 11
Figure 12
Selecting the
FM Tune
button (Figure 12) will take you to the FM Tuning Menu (Figure 13). From there you will be able to
change the station frequency up or down one step at a time. If you hold the tune up or tune down button for two
seconds the frequencies will change faster until you release the button. You can also scan to the next active station auto-
matically by pressing the scan up or scan down buttons (Figure 14). In order to automatically change stations again
press the scan button once more.
FM Tuning Menu
FM Tuning Menu
Figure 13
Figure 14
Storing and Re-calling Your Favorite FM Stations
The PIAB has two memory banks that can store up to 4 stations each. Once you have tuned to one of your favorite sta-
tions you are only a few steps away from storing that station into memory. From the FM Tuning menu you will select the
Store
button (Figure 15). The display will change to the
FM1
memory bank (Figure 16). From this menu you will hold down
the button for two seconds next to the location you want to store that station. If all the banks are used then press the
FM2
button which will take you to
FM2
memory bank. If all of the memory banks are used you can store over an existing
location by pressing the button down for two seconds. Please note once you have stored a new station over an existing
memory location the previous station will no longer be available from your stored presets.
FM Tuning Menu
FM1 Memory Bank
Figure 15
Figure 16
To access any of the stored stations select
Presets
from the FM Menu (Figure 17). Selecting presets will take you to the first
memory bank
FM1
. From there you can select any of the stored stations from either bank (Figure 18).
