Sorex wireless DO101000C02, Руководство пользователя

Страница: 13 / 35

13
3. Connect the relay cable to the SOREX Door
Phone & Code module and put it into the cut-
out.
Mind the diagramm in Figure 6. The SOREX Door Phone
& Code is fixated with the four screw clamps on the sides
of the product.
4. Slide the front panel on to the housing from top
to bottom.
5. To prevent water inlet, if the module is
mounted in an outdoor environment, a sealing
ring out of acrylic or silicone should be applied
around the front panel.
6. Apply voltage to the module.
Please mind that functionality of the keypad is only
given, if the voltage is applied after the front panel
has been attached.