22
Periods
menu 3
8
8
8. Periods
Menu 3 “periods” is used to set time,
date, thermostat and circulation
periods.
The menu is closed by pressing
“esc” or selecting “Exit periods”.
8.1 Time and date
menu 3.1
This menu is used to set the current time and date.
8.2 Thermostat 1 periods
menu 3.2
8.3 Thermostat 2 periods
menu 3.3
8.4 Circulation periods
menü 3.4
Set the desired periods of time when the thermostat 1 should be active. 3
periods can be set per day, settings can also be copied to other days.
Outside the set times the thermostat is switched off.
Setting range: from 00:00 to 23:59 /default setting: 06:00 to 22:00
Set the desired periods of time when the thermostat 2 should be active. 3
periods can be set per day, settings can also be copied to other days.
Outside the set times the thermostat is switched off.
Setting range: from 00:00 to 23:59 /default setting: 06:00 to 22:00
Set the desired periods of time when the circulation should be active (only
program 1). 3 periods can be set per day, settings can also be copied to
other days.
Setting range: from 00:00 to 23:59 /default setting: 06:00 to 22:00
Caution
For analysis of the system data it is essential for the time to be
set accurately on the controller. Please note that the clock does
not continue to run if the mains voltage is interrupted, and must
therefore be reset.
Caution
In the inactive periods additional heating is switched off regardless
of the measured temperatures.
