Safety Instructions
EU-Conformity
By affixing the CE mark to the unit the manufacturer declares that the SBMC conforms to the following relevant safety regulations:
l
EU low voltage directive 2014/35/EU
l
EU electromagnetic compatibility directive 2014/30/EU
conforms. Conformity has been verified and the corresponding documentation and the EU declaration of conformity are kept on
file by the manufacturer.
General instructions
Please read carefully!
These installation and operating instructions contain basic instructions and important information regarding safety, installation,
commissioning, maintenance and the optimal use of the unit. Therefore these instructions must be read and understood com-
pletely by the installation technician/specialist and by the system user before installation, commissioning and operation of the
unit.
This unit is an automatic, electrical Biomass Controller. Install the device only in dry rooms and under environmental conditions
as described under "Technical Data".
The valid accident prevention regulations, VDE regulations, the regulations of the local power utility, the applicable DIN-EN stand-
ards and the installation and operating instruction of the additional system components must also be observed.
Under no circumstances does the unit replace any safety devices to be provided by the customer!
Installation, electrical connection, commissioning and maintenance of the device may only be carried out by an appropriately
trained specialist. Users: Make sure that the specialist gives you detailed information on the function and operation of the unit.
Always keep these instructions in the vicinity of the unit.
The manufacturer does not take over any liability for damage caused through improper usage or non-compliance of this manual!
Explanation of Symbols
Danger
Failure to observe these instructions can result in electrocution.
Danger
Failure to observe these instructions can result in serious damage to health such as scalding or life-threatening
injuries.
Caution
Failure to observe these instructions can result in destruction of the unit or the system, or environmental dam-
age.
Caution
Information which is especially importation for the function and optimal use of the unit and the system.
3
