17
Menu “3. Display mode” is used to define
the controller’s display for normal opera-
tion.
This display appears whenever two min-
utes go by without any key being pressed.
The main menu appears again when a
key is pressed.
The menu is closed by pressing “esc” or
selecting “Exit display mode”.
Display mode
3. - Display mode
3.1. - Schematic
In graphics mode, the selected hydraulic systems are depicted with the measured
temperatures and operating states of the connected consumers.
3.2. - Overview
In overview mode, the measured temperatures and operating states of the connected
consumers are depicted in text form.
3.3. - Alternating
In alternating mode the schematic mode and then the overview mode are active for 5
seconds at a time.