Soredex Cranex Novus e, Руководство по обслуживанию

Страница: 96 / 122

CRANEX ® Novus e 5. S2terminal and service commands
Service manual 87
logsign make a service signature for current events
Allows a short note to be added to a log entry.
Add the note,
____________________________________________
> logsign
Note ......
____________________________________________
and then press
Enter
. The note will appear in the log.
mac print mac address
Displays the current MAC address of the unit.
mainscalib calibrates mains voltage
parameters: <current voltage>
Recalibrates the mains voltage if L1200 CPU board is
replaced.
Use a RMS multimeter to measure the actual supply
voltage (from the mains plug, L1910 or L1500) and then
enter this value.
____________________________________________
>mainscalib xxx
(xxx is the value read from multimeter)
____________________________________________
and then press
Enter
.
mainsprint print current mains voltage value
Displays the current line voltage value as measured by
the unit.
Useful for debugging when the unit displays error E5.
motortest run exposure ramp
A test drive for the rotation motor. The test checks that
motor is driven to the correct angle and that it works as
speci fi ed.