Sony ZV-1F, Руководство пользователя

Страница: 128 / 298

[G] -7 (light green) to +7 (deep green)
[B] -7 (light blue) to +7 (deep blue)
[C] -7 (light cyan) to +7 (deep cyan)
[M] -7 (light magenta) to +7 (deep magenta)
[Y] -7 (light yellow) to +7 (deep yellow)
Detail
Sets items for [Detail].
Level: Sets the [Detail] level. (-7 to +7)
Adjust: The following parameters can be selected manually.
Mode: Selects auto/manual setting. (Auto (automatic optimization) / Manual (The details are set manually.))
V/H Balance: Sets the vertical (V) and horizontal (H) balance of DETAIL. (-2 (off to the vertical (V) side) to +2 (off to
the horizontal (H) side))
B/W Balance: Selects the balance of the lower DETAIL (B) and the upper DETAIL (W). (Type1 (off to the lower
DETAIL (B) side) to Type5 (off to the upper DETAIL (W) side))
Limit: Sets the limit level of [Detail]. (0 (Low limit level: likely to be limited) to 7 (High limit level: unlikely to be limited))
Crispening: Sets the crispening level. (0 (shallow crispening level) to 7 (deep crispening level))
Hi-Light Detail: Sets the [Detail] level in the high intensity areas. (0 to 4)
To copy the settings to another picture profile number
You can copy the settings of the picture profile to another picture profile number.
MENU →
(Exposure/Color) → [Color/Tone] → [ Picture Profile] → [Copy].
To reset the picture profile to the default setting
You can reset the picture profile to the default setting. You cannot reset all picture profile settings at once.
MENU →
(Exposure/Color) → [Color/Tone] → [ Picture Profile] → [Reset].
Note
Movie shooting and still image shooting share the same setting values. Adjust the setting values when you switch shooting
modes.
If you change [Gamma], the available ISO value range changes.
When using the S-Log2 or S-Log3 gamma, noise becomes more noticeable compared to when using other gammas. If the noise
is still considerable even after processing the images, it may be improved by shooting with a brighter setting. However, the
dynamic range becomes narrower accordingly when you shoot with a brighter setting. We recommend checking the picture in
advance by test shooting when using S-Log2 or S-Log3.
Setting [ITU709(800%)], [S-Log2] or [S-Log3] may cause an error in the white balance custom setup. In this case, perform
custom setup with a gamma other than [ITU709(800%)], [S-Log2], or [S-Log3] first, and then reselect [ITU709(800%)], [S-Log2],
or [S-Log3] gamma.
When set to [ITU709(800%)], [S-Log2], or [S-Log3], the settings for [Black Level] become disabled.
If you set [Slope] to +5 in [Manual Set] under [Knee], [Knee] will be disabled.
S-Gamut, S-Gamut3.Cine, and S-Gamut3 are color spaces exclusive to Sony. However, this camera's S-Gamut setting does not
support the whole S-Gamut color space; it is a setting to achieve a color reproduction equivalent to S-Gamut.
Related Topic
Gamma Display Assist
5-041-856-11(1) Copyright 2022 Sony Corporation
128