Sony XTL-W7000, Инструкция по установке/подключению

Страница: 20 / 48

20
3
Route the antenna input cable, using the supplied antenna
cord clamp
ql
to hold it in place.
Rout the cable so that it will be completely covered when
the front pillar molding is replaced.
6
Mount the TV antenna amplifier unit
qd
.
1 Mount the TV antenna amplifier unit.
Mount the unit near the floor in the foot area in front of
the passenger’s seat, in a location where the cables will
reach the expansion unit. (Be sure to wipe away any dirt
on the mounting surface.)
Important note
Use tape or other fasteners to route the
cables such that they cannot interfere
with vehicle operation. Do not wrap the
cables around the steering column, gear
shift lever, brake pedal, etc.
Important note
It would be extremely dangerous if the
TV antenna amplifier unit were to get
stuck underneath the brake pedal. Be
sure to mount the amplifier on the
passenger’s side.
Antenna cord clamp
ql
Antenna cord clamp
ql
Antenna input
cable (right)
qg
Antenna input cable (left)
qg
Antenna
cord clamp
ql
IMPORTANT CAUTION!
Do not route the cable
near the pedals!
TV antenna
amplifier unit
qd
Peel off the
protective sheet
TV antenna
amplifier unit
qd
Fold back
the floor
mat