Sony XTL-W7000, Инструкция по установке/подключению

Страница: 14 / 48

14
Sony Bus DVD
Master unit
(optional)
Nissan cars
Align the brackets of the factory-installed car stereo with the
mounting holes marked “N” on the side of the TV main unit, and
use the supplied pan-head screws
5
to fasten the brackets.
* Be sure to use only the supplied pan-head screws
5
for
installation. If any other screws are used, make sure they
conform to the requirements shown below.
Using longer screws can cause internal damage to the unit.
5 mm
6 mm
Damage can also occur if the screws are used directly on the
unit without the brackets of the factory-installed car stereo.
Screws of factory-
installed car stereo
bracket
Bracket of
factory-installed
car stereo
5
Toyota cars (illustration shows an example for a Toyota car)
Align the brackets of the factory-installed car stereo with the
mounting holes marked “T” on the side of the TV main unit, and
use the supplied screws to fasten the brackets. For Toyota cars,
the supplied screws
5
should be used.
Notes
• Do not press the front panel buttons of
the unit during installation and do not
apply strong force.
• Do not place any objects on top of the
unit.
• If a salient of the genuine bracket
touches the unit due to its figure, and
makes attachment hard, process the
bracket by scraping the salient off.
Screws of factory-
installed car stereo
bracket
Bracket of
factory-installed
car stereo
XTL-W7000
XTL-W7000
Sony Bus DVD
Master unit
(optional)
5