7
GB
BASS REMOTE connector
Connector for the bass remote.
INPUT VOLTAGE switch
Selects the type of input connection.
• “LOW”: Select this for low-level (line level)
input connection using RCA extension cables
(not supplied).
• “HIGH”: Select this for high-level (speaker
level) input connection using a speaker-wire-
to-RCA adaptor (not supplied).
INPUT connector
For details about the connection, see “Input
Connection” (page 12).
LINE OUT connector
For details about the connection, see “Output
Connection” (page 15).
SPEAKER OUT terminal
For details about the connection, see “Speaker
Connection” (page 14).
Fuse (40 A)
+12 V terminal
REMOTE terminal
GROUND terminal
Bass Remote
Bass remote adjusts the bass level output of the SUB CH (subwoofer channel). To use, connect the bass
remote’s cable to the BASS REMOTE connector
on the connector panel (front panel).
Volume control knob
Turn the knob clockwise to increase the volume
(gain).
Turn the knob counterclockwise to decrease the
volume (gain).
CAUTION
Excessive gain input may cause distortion of the sound
produced by the connected subwoofer. Do not increase
the gain level excessively on the bass remote. The sound
produced by the connected subwoofer may also
become distorted if the volume of your car audio unit is
set too high.
Connector Panel (Front Panel)
1
3
L
REMOTE
+
12 V
GROUND
40 A
40 A
40 A
40 A
INPUT
VOLTAGE
LOW HIGH
INPUT
SPEAKER OUT
LINE OUT
CH 3
CH 4
1
2
4
2
R
L
R
5
6
BRIDGED
R
SUB CH
CH 1
CH 2
BRIDGED
L
R
L
BASS
REMOTE
ȼ Ƚ
ɀ
ȿ
ɂ
Ɂ
Ⱦ
Ȏ