15
GB
4 s 1 subwoofer system
With “Input Connection” (page 12)
,
,
,
,
or
.
2 bridged s 2 subwoofer
system
With “Input Connection” (page 12)
.
2 bridged s 1 subwoofer
system
With “Input Connection” (page 12)
.
Through the LINE OUT connector, this amplifier can
output signals to additional amplifiers. This allows a
flexible system connection that utilizes multiple
amplifiers.
Notes
• Audio signals output from LINE OUT connectors are not
affected by any signal processing, such as the HPF and LPF
settings.
• According to your needs, set the LINE OUT MODE switch
on the control panel (top panel) to “THRU”, “STEREO” or
“ALL”.
• Refer to the operating instructions supplied with your
additional amplifier for connection details.
Front speaker (min. 4 Ω)
Subwoofer (min. 2 Ω)
Rear speaker (min. 4 Ω)
Full range speaker (min. 2 Ω)
Subwoofer (min. 4 Ω)
Output Connection
Full range speaker (min. 2 Ω)
Subwoofer (min. 2 Ω)
Additional amplifier