7
Location of Parts and Operation
Location of Parts and Operation
a
Dip switches for setting functions
This switches are used to adjust white balance and shutter
speed; and to flip AGC (ON/OFF) and output signals (Y/
C/VBS).
For details, see “Mode Setting by Dip Switch” on page 8.
b
One Push WB switch
One Push white balance functions when the white balance
adjustment mode is set to One Push WB. The white
balance is automatically adjusted when this switch is
pressed, and the color balance is retained after adjustment.
c
NF mount
d
DC IN/SYNC/VIDEO connector (multi 12-pin)
This connector inputs DC 12 V power and outputs the
video signal when the CCXC-12P02N/12P05N/12P10N/
12P25N camera cable is connected.
If the unit is connected to devices that originate a
synchronized signal, the external synchronous signal (VS,
VBS, HD/VD) can be used to move the color camera
module.
VBS signals input as external synchronized signals
perform the same functions as VS signals. (Burst signals
are not locked and are free running.)
1
2
3
4
