Sony XC-505P, Техническое руководство

Страница: 24 / 34

24
Camera Control Commands
Internal Color Bar Output Setting
Flip Output Setting
Serial Communication Speed Setting
OSD Output Setting
MEMO
Memo Saving
Memo Display
Miscellaneous
Setting Value Control Commands
The setting value control commands control camera
setting data stored in the EEPROM. The following
command types are available:
Command
Name
COLORBAR
Parameter 1 Color bar output setting ON/OFF: 0 to 1
0: ON
1: OFF
Default is 0
Conditions None
Process Enables or disables color bar output.
When ON, the display shows 100% color
bars.
Command
Name
FLIP
Parameter 1 Flip setting: 0 to 3
0: OFF
1: Flip horizontally
2: Flip vertically
3: Flip horizontally and vertically
Default is 0
Conditions None
Process Sets the flip output mode.
The output image can be flipped horizontally
and vertically.
Command
Name
BRATE
Parameter 1 Baud rate: 0 to 2
0: 9600 [bps]
1: 19200 [bps]
2: 38400 [bps]
Default is 2
Conditions None
Process Sets the serial communication speed.
Unique to this command, the baud rate is
changed after the “OK” response has been
sent.
Command
Name
OSD
Parameter 1 OSD output ON/OFF setting: 0 to 1
0: OFF
1: ON
Default is 0
Conditions None
Process Sets the OSD output mode.
Remarks The only command with OSD output is
AUTOWB (One Push).
Command
Name
MEMO-CAPTURE
Parameter 1 Memo save destination: 0 to 1
0: Memo 1
1: Memo 2
Default is 0
Conditions Saving is available only when MEMO-
DISPLAY is “1: Still Image”. Otherwise,
ERROR STATUS is returned.
Process Saves a still image as a memo.
Remarks The memo image is lost when power turns
off.
Command
Name
MEMO-DISPLAY
Parameter 1 Display selection: 0 to 3
0: Native image
1: Still image
2: Memo 1 image
3: Memo 2 image
Default is 0
Conditions Memo 1 and 2 images are not selectable until
saved (ERROR STATUS is returned).
Switching from a memo image to another still
image is not possible.
Process Selects the image for output.
Remarks The Still function can capture the processed
image of internal color bars and the OPD
frame state.
Type Description
Setting
Initialization Resets user’s camera control settings to their
factory default values.
Setting
Saving Writes user’s camera control settings to the
EEPROM.
Setting
Loading Loads user’s camera control settings from
the EEPROM.
View Setting
Values Displays the current user settings for each
command.